Impreza GT F4-2.5L Turbo (2009)
Hose/Line HVAC: Service and Repair
Hose and Pipe
REMOVAL
CAUTION:
-
When disconnecting hoses, do not apply an excessive force to them. After installing, check that no torsion or excessive tension applied to
the hoses.
-
Seal the disconnected hose with a plug or vinyl tape to prevent foreign matter from entering.
1. Disconnect the ground cable from battery.
2. Using the refrigerant recovery system, discharge refrigerant.
3. Remove the bolt and detach the hoses and pipes.
INSTALLATION
CAUTION:
-
Replace the O-rings with new parts.
-
When connecting hoses, do not apply an excessive force to them. After installing, check that no torsion or excessive tension applied to the
hoses.
1. Install in the reverse order of removal.
2. Charge refrigerant.
Tightening torque: N.m (kgf.m, ft.lb)
T1: 7.5 (0.76, 5.5)
T2: 10 (1.0, 7.4)
