Impreza GT F4-25L Turbo (2009) Fuel Level Sensor - Service and Repair
Fuel Gauge Sender: Service and Repair
Fuel Level Sensor
Fuel Level Sensor
REMOVAL
WARNING: Place "NO OPEN FLAMES" signs near the working area.
CAUTION:
-
Be careful not to spill fuel.
-
If the fuel gauge indicates that two thirds or more of the fuel is remaining, be sure to drain fuel before starting work to avoid the fuel to
spill.
NOTE: The fuel level sensor is built in fuel pump assembly.
1. Remove the fuel pump assembly.
2. Disconnect the connector (A) from the sub tank bracket assembly.
3. Remove the fuel temperature sensor (B) from sub tank.
4. Slide the fuel level sensor in the direction of the arrow and remove the fuel level sensor by pressing the claw (A) of the fuel level sensor.
INSTALLATION
Install in the reverse order of removal.
