Impreza GT F4-2.5L Turbo (2009)
3) Pull up the brake pedal and make sure that play is 0.5 - 2 mm (0.020 - 0.079 in).
4) Connect the stop light switch connector.
5) Check that the brake light operate properly.
NOTE:
It is not necessary to check or adjust the clearance to the stop light switch because it is automatically adjusted at installation.
INSPECTION
1) Measure the resistance between stop light switch terminals.
-
5 door model
-
4 door model
2) If the stop light switch does not operate properly, replace with a new part.