subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Drive Belt|Service and Repair|Page 726 > < Drive Belt|Service and Repair|Page 724
Page 9
background image

13) Slowly turn the crank pulley clockwise, and install the rear side belt.

CAUTION:
Be careful that the total of procedures 8), 11), 12) and 13) does not exceed 330°; failure to do so may cause damage to the rear side belt and
fall of the belt guide holder.

14) Remove the belt guide and belt guide holder from the crank pulley.

15) Remove the belt stopper from the compressor bracket.

CAUTION:
Always remove the belt stopper; failure to do so may cause smoke, fire, or belt cutting.

Drive Belt|Service and Repair|Page 726 > < Drive Belt|Service and Repair|Page 724