Impreza GT F4-2.5L Turbo (2009)
Clutch Fluid: Service and Repair
Clutch Fluid Air Bleeding
Clutch Fluid Air Bleeding
PROCEDURE
NOTE:
^
The illustration below is suitable for every model. Perform the same procedures for the other models.
^
Bleed air from the oil line with help of a co-worker.
1) Remove the air intake chamber. (Non-turbo model)
2) Remove the intercooler. (Turbo model)
3) Fit one end of a vinyl tube into the air bleeder of the operating cylinder, and put the other end into a brake fluid container.
4) Slowly depress the clutch pedal and keep it depressed. Then open the air bleeder to discharge air together with the fluid.
Release the air bleeder for 1 or 2 seconds. Next, with the bleeder closed, slowly release the clutch pedal.
CAUTION:
Cover the bleeder with cloth to prevent brake fluid from being splashed on surrounding parts when loosening the bleeder.
5) Repeat procedure 4), until there are no more air bubbles in the vinyl tube.
6) Tighten the air bleeder.
Tightening torque:
T: 7.8 N-m (0.8 kgf-m, 5.8 ft-lb)
