Impreza GT F4-2.5L Turbo (2009)
Variable Induction Control Valve: Service and Repair
Tumble Generator Valve Assembly
REMOVAL
1. Release the fuel pressure.
2. Disconnect the ground cable from battery.
3. Open the fuel filler lid and remove the fuel filler cap.
4. Remove the intake manifold.
5. Disconnect the connector from the tumble generator valve assembly.
6. Remove the fuel injector.
7. Remove the tumble generator valve assembly from the intake manifold.
INSTALLATION
Install in the reverse order of removal.
NOTE: Use a new gasket.