subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Driver's Airbag Module|Page 4366 > < Driver's Airbag Module|Page 4364
Page 1
background image

Air Bag: Service and Repair
Curtain Airbag Module

Curtain Airbag Module

REMOVAL

CAUTION:  Refer to "CAUTION" of "General Description" before handling the airbag module.

1. Turn the ignition switch to OFF.
2. Disconnect the ground cable from battery and wait for at least 20 seconds before starting work.
3. Remove the rear quarter trim.

4. Disconnect the curtain airbag module connector.

-

5 DOOR MODEL

-

4 DOOR MODEL

5. Remove the roof trim.
6. Remove the airbag guide from the front pillar.

7. Remove the bolt, and remove the curtain airbag module.

CAUTION:
-

Be careful not to damage the curtain airbag module during removal.

-

Never open the curtain airbag module before deploying it. Never reuse the deployed curtain airbag module.

-

5 DOOR MODEL

Driver's Airbag Module|Page 4366 > < Driver's Airbag Module|Page 4364