Impreza GT F4-2.5L Turbo (2009)
Power Steering Pump: Removal and Replacement
Removal
Oil Pump
REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the V-belts (front side belt).
3) Disconnect the connector from power steering pump switch.
4) Disconnect the pressure hose and suction hose from the oil pump.
CAUTION:
^
Do not allow fluid to come into contact with the pulley belt.
^
To prevent foreign matter from entering the hose and pipe, cover the open ends with clean cloth.
^
Non-turbo model
^
Turbo model
5) Remove the installation bolt of the power steering pump bracket.
6) Place the oil pump bracket in a vise, and remove the two bolts from the front side of the oil pump.
