Impreza GT F4-2.5L Turbo (2009)
17) Install new O-ring to valve assembly.
18) Insert the valve assembly into place while facing the rack teeth toward pinion.
19) Tighten the bolts alternately to secure the valve assembly.
Tightening torque:
20 N-m (2.0 kgf-m, 14.8 ft-lb)
CAUTION:
Be sure to alternately tighten the bolts.
20) Apply liquid gasket to 1/3 or more of entire perimeter of adjusting screw thread.
Liquid gasket:
THREE BOND 1141 (Part No. 004403006)
21) Apply a coat of grease to the sliding surface of sleeve and seating surface of spring, and then insert the sleeve into steering body.
Charge the adjusting screw with grease, and then insert the spring into adjusting screw. Then install on the steering body.
