Impreza GT F4-2.5L Turbo (2009)
Front arm to Support plate:
110 N-m (11.2 kgf-m, 81.1 ft-lb)
Support plate body:
150 N-m (15.3 kgf-m, 110.6 ft-lb)
Tie-rod end to Housing:
27 N-m (2.8 kgf-m, 19.9 ft-lb)
After tightening to the specified torque, tighten the castle nut further but within 60° until the hole in the ball stud is aligned with a slot in castle nut
Tightening torque:
Universal joint:
24 N-m (2.4 kgf-m, 17.7 ft-lb)
Stabilizer bracket:
25 N-m (2.5 kgf-m, 18.4 ft-lb)
Stabilizer link:
45 N-m (4.6 kgf-m, 33.2 ft-lb)
Power steering hose to Steering gearbox:
15 N-m (1.5 kgf-m, 11.1 ft-lb)
2) Purge air from the power steering system.
3) Inspect the wheel alignment and adjust if necessary.
Inspection
INSPECTION
Check the crossmember for damage or cracks, and correct or replace if defective.
