Impreza GT F4-2.5L Turbo (2009)
Shift Interlock Solenoid: Service and Repair
Installation
INSTALLATION
Install in the reverse order of removal.
NOTE:
^
Refer to "COMPONENT" for each tightening torque.
^
When installing the plate guide COMPL, set the select lever to the "D" range (normal mode position), and be careful for the following points.
^
Insert the protrusion (B) of the plate guide COMPL into the hole on shift lock solenoid unit (A).
^
Insert link (D) of the shift lock release into link (C) of the shift lock solenoid unit.
^
Connect the switch and solenoid terminals to the connector.