subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Spark Plug|Removal and Installation|Page 1224 > < Mechanical Specifications|Page 1221
Page 1
background image

Spark Plug: Service and Repair
Removal and Installation

CAUTION:  All spark plugs installed on an engine, must be of the same heat range.

Spark plug:  

NGK:  BKR5E-11

(Alternate)
CHAMPION:  RC10YCA 

1. #1 SPARK PLUG

1. Disconnect battery ground cable.
2. Remove air intake duct and resonator chamber. (2200 cc California SPEC. vehicle)

1. Remove bolt which installs air intake duct on the front side of body.

2. Remove bolt which installs air intake duct on body.

Spark Plug|Removal and Installation|Page 1224 > < Mechanical Specifications|Page 1221