Impreza L Sport Wagon F4-2.2L SOHC (1999)
-
When disconnecting pipe C, use two wrenches to prevent deformities.
-
Be careful to keep pipe connections free from foreign matter.
6. Remove bolt A Disconnect pipe C from oil pump. Disconnect pipe D from oil tank.
CAUTION:
-
Do not allow fluid from the hose end to come into contact with pulley belt.
-
To prevent foreign matter from entering the hose and pipe, cover the open ends of them with a clean cloth.
INSPECTION
Check all disassembled parts for wear, damage or other abnormalities. Repair or replace faulty parts as required.
INSTALLATION
1. Interconnect pipes C and D.
Tightening torque:
Joint nut 15 ± 5 Nm (10.3 ± 3.6 ft. lbs.).
CAUTION: Visually check that hose between tank and pipe D is free from bending or twisting.
2. Tighten bolt A.
Tightening torque:
13 ± 3 Nm (9.4 ± 2.2 ft. lbs.).