subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Accelerator Pedal|Service and Repair|Page 2283 > < Idle Speed|Specifications|Page 2279
Page 1
background image

Accelerator Pedal: Service and Repair

A: ON-CAR SERVICE

1. BRAKE PEDAL

1. Check position of pedal pad.

Pedal height: L  148 mm (5.83 inch)

2. If it is not in specified value, adjust it by adjusting brake booster operating rod length.

3. Measure the clearance between threaded end of stop light switch and stopper. If it is not in specified value, adjust it by adjusting position of

stop light switch.

CAUTION:  Be careful not to rotate stop light switch.

Stop light switch clearance: A  0.3 mm (0.012 inch)

4.

Apply grease to operating rod connecting pin to prevent it from wearing.

2. CLUTCH PEDAL (2200 cc MODEL)

1. Check clutch pedal free play by operating pedal by hand.

Free play: L (At clutch pedal pad)  10 - 20 mm (0.39 - 0.79 inch)

Accelerator Pedal|Service and Repair|Page 2283 > < Idle Speed|Specifications|Page 2279