Impreza L Sport Wagon F4-2.2L SOHC (1999)
1. Before installing rear oxygen sensor, apply anti-seize compound only to threaded portion of rear oxygen sensor to make the next removal easier.
Anti-seize compound: SS-30 by JET LUBE
CAUTION: Never apply anti-seize compound to protector of rear oxygen sensor.
2. Install rear oxygen sensor.
Tightening torque:
21 ± 3 Nm (2.1 ± 0.3 kg.m, 15.2 ± 2.2 ft.lb)
3. Connect connector to rear oxygen sensor.
4. Lower the vehicle.
5. Connect battery ground cable.
