Impreza L Sport Wagon F4-2.2L SOHC (1999)
YES:
Replace airbag control module.
NO:
Go to step 5L4.
5L4: AIRBAG MAIN HARNESS INSPECTION
1. Disconnect connector (AB11) and (AB12), then connect test harness F connector (2F) and connector (AB11).
2. Measure resistance between test harness I connector (3I) terminal and test harness F connector (3F) terminal.
CHECK: Is the resistance less than 10 Ohms?
YES:
Go to step 5L5.
NO:
Replace airbag main harness.
5L5: AIRBAG MAIN HARNESS INSPECTION
Measure resistance between test harness I connector (3I) terminal and test harness F connector (3F) terminal.
CHECK: Is the resistance less than 10 Ohms?
YES:
Go to step 5L6.
NO:
Replace airbag main harness.
5L6: AIRBAG MAIN HARNESS INSPECTION
Measure resistance across test harness I connector (3I) terminal and chassis ground.
CHECK: Is the resistance more than 10 k Ohms?
YES:
Go to step 5L7.