subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Neutral Safety Switch|Testing and Inspection|Page 494 > < Neutral Safety Switch|Testing and Inspection|Page 492
Page 2
background image

9. Move range select lever to parking position (left side).

10. Remove inhibitor switch from transmission.

Installation  

1. Install inhibitor switch to transmission case.
2. Move range select lever to neutral position. 

3. Using ST, tighten bolts of inhibitor switch. Refer to Adjustments.  

ST 499267300 STOPPER PIN

4. Install select cable to range select lever. 

Neutral Safety Switch|Testing and Inspection|Page 494 > < Neutral Safety Switch|Testing and Inspection|Page 492