subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Power Steering Pump > < Power Steering Line/Hose|Specifications|Page 3763
Page 4
background image

11. Finally check clearance between pipes and/or hoses, as shown above. If clearance between cruise control pump and power steering hose is less

than 10 mm (0.39 inch), proceed as follows:
a. Move clamped section (A) down to a point where pipe is close to crossmember 

Pipe-to-crossmember clearance: 10 mm (0.39 inch), min.

b. Check that clearance between cruise control pump and power steering hose is at least 10 mm (0.39 inch). If it is not, bend section (B) down

until a clearance of at least 10 mm (0.39 inch) is obtained.

Power Steering Pump > < Power Steering Line/Hose|Specifications|Page 3763