Impreza L Sport Wagon F4-2.2L SOHC (1999)
2. Apply a coat of specified power steering fluid to inner wall of valve housing.
3. Attach ST2 to ST1, and press oil seal into place using a press.
ST1 34099FA120 INSTALLER & REMOVER SEAL
ST2 34099FA130 INSTALLER SEAL
(1) Face oil seal in the direction shown in figure when installing.
(2) To avoid scratching oil seal, apply a coat of grease to contact surface of installer and oil seal.
(3) To facilitate installation, attach oil seal to installer and position in valve housing before pressing into place.
4. Using ST and press, install special bearing in valve housing.
ST 34099FA120 INSTALLER & REMOVER SEAL
NOTE: To facilitate installation, attach ball bearing to remover and position in valve housing before pressing it into place.
Pinion And Valve Assembly
