Impreza L Sport Wagon F4-2.2L SOHC (1999)
CAUTION: Do not remove circlip attached to inside of differential. Be careful not to damage side bearing retainer. Always use bolt as shown in
figure, as supporting point for ST during removal.
7. Remove DOJ from rear differential using tire lever. (Except 2200 cc MT model)
NOTE: The side spline shaft circlip comes out together with the shaft.
CAUTION: When removing the DOJ from the rear differential, fit tire lever to the bolt as shown in figure so as not to damage the axle shaft
holder.
8. Scribe an alignment mark on rear lateral link adjusting bolt and crossmember.
9. Remove outer lateral link bolt securing lateral link to housing.
10. Remove bolts securing front and rear lateral links to crossmember, detach lateral links.
CAUTION: To loosen adjusting bolt, always loosen nut while holding the head of adjusting bolt.
