Impreza L Sport Wagon F4-2.2L SOHC (1999)
3. Turn lateral link upside down. Press ST plunger in the opposite direction that outlined in step 2 until bushing is correctly positioned in trailing link
.
NOTE: Use the same ST as that used during disassembly.
INSTALLATION
To install, reverse removal procedures, observing the following instructions.
CAUTION:
^
Do not allow DOJ splines to damage side oil seal.
^
Always tighten rubber bushing location when wheels are in full contact with the ground and vehicle is curb weight.
^
Tighten nut when installing adjusting bolt.
^
Replace self-locking nut and DOJ circlip with new ones.
NOTE: Lateral link washers for AWD model can be identified by the following color: Gold (AWD model). Check wheel alignment and adjust if
necessary.