Impreza L Sport Wagon F4-2.2L SOHC (1999)
9. Remove disc rotor from hub. If disc rotor seizes up within hub? drive disc rotor out by installing an 8-mm bolt in screw hole on the rotor.
10. Remove cotter pin and castle nut which secure tie-rod end to housing knuckle arm.
11. Using a puller, remove tie rod ball joint from knuckle arm.
12. On ABS equipped models, remove ABS sensor assembly and harness in advance.
NOTE: Be sure to use soft jaws (such as aluminum plates) when placing the mating surfaces of housing and strut in a vise.
13. Remove transverse link ball joint from housing.
