Impreza L Sport Wagon F4-2.2L SOHC (1999)
CAUTION: Cover open end of wheel cylinder to prevent entry of foreign particles.
9. Disconnect end of parking brake cable.
10. Remove bolts which secure trailing link assembly to rear housing.
CAUTION: Discard old self-locking nut. Replace with a new one.
11. Remove bolts which secure lateral link assembly to rear housing.
CAUTION: Discard old self-locking nut. Replace with a new one.
12. Disengage Bell Joint (BJ) from housing splines, and remove rear drive shaft assembly. If it is hard to remove, use Special Tool (ST)s.
ST1 926470000 AXLE SHAFT PULLER
ST2 927140000 PLATE
CAUTION:
^
Be careful not to damage oil seal lip when removing rear drive shaft.
^
When rear drive shaft is to be replaced, also replace inner oil seal with a new one.
