subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Campaign - Axle Shaft Grease Leakage|Page 3079 > < Campaign - Axle Shaft Grease Leakage|Page 3077
Page 7
background image

VEHICLES INVOLVED

The potentially involved vehicles are 1997-1999 Model Year Legacy, Forester and Impreza models as indicated on Chart 1.

Affected vehicles are listed in Chart 1. However, only some of those vehicles within the affected range require inspection and repair. Some vehicles may
have already been repaired; check the vehicle for a campaign completion sticker in addition to the Dealer Communication System (DCS). All vehicles
must be confirmed as applicable using the Vehicle Coverage Inquiry in the DCS.

Dealers will be forwarded a listing of affected vehicles as indicated from the retail sale records. Customer letters will be sent only for vehicles shown as
sold on the date indicated on the listings. If you sold an affected vehicle since that date, you need to contact the owner and have the customer return for
the inspection/repair. Be certain to check the DCS system before contacting the owner to confirm it is an affected vehicle.

PARTS INFORMATION

One kit is required for each vehicle repaired. Each kit includes two (2) seal rings, two (2) spring pins, and two (2) gaskets.

KIT PART NUMBER

APPLICABILITY DEALER COST SUGG. LIST PRICE

28097AC000

2.5L A/T

$6.45

$9.03

28097AC010

2.5L M/T

$6.45

$9.03

28097AC020

2.2L A/T

$6.75

$9.45

28097AC030

2.2L M/T

$6.75

$9.45

Dealers will be sent free of charge the following items for this repair procedure:

PART NUMBER

DESCRIPTION

DEALER COST

S0A635062

LOCTITE GEL

N/C

S0A635063

NOX RUST

N/C

S0A635064

LOCTITE PLUNGER

N/C

The Loctite Gel and Nox Rust spray sent free of charge will repair approximately 250 vehicles. Be sure to follow instructions on the products for proper
use and storage. If additional quantities are required you should contact your Parts Information Coordinators or Parts Expeditors as required.

SERVICE PROCEDURE

1.

Set the vehicle on a lift for repair.

2.

Open the hood and disconnect the front 02 sensor connector.

3.

Raise the vehicle and disconnect the rear 02 sensor connector.

Campaign - Axle Shaft Grease Leakage|Page 3079 > < Campaign - Axle Shaft Grease Leakage|Page 3077