Impreza L Sport Wagon F4-2.2L SOHC (1999)
Wiper Motor: Service and Repair
Rear Wiper and Washer
WIPER MOTOR
1. Remove cap and special nut.
CAUTION: Be careful not to strike service tool against nozzle during removal.
Tightening torque:
7.4 ± 1.5 N.m (0.75 ± 0.15 kg-m, 5.4 ± 1.1 ft-lb)
2. Remove rear gate trim.
3. Undo clips which secure harness, and disconnect connector of wiper motor.
4. Separate washer hoses at joint.
5. Remove attaching screws and take out wiper motor assembly.
CAUTION: Be careful not to damage O-ring when removing wiper motor assembly.
6. Installation is in the reverse order of removal.
Tightening torque:
5.9 ± 1.5 N.m (0.6 ± 0.15 kg-m, 4.3 ± 1.1 ft-lb)