Impreza Outback Sport AWD F4-2.5L SOHC (2002)
2)
Apply 3MTM Heavy Drip-Chek(TM) Sealer 08531 to the gap of the seam of the inner door panel (See figure 2, below).
3)
Reinstall the sealing cover (if equipped with standard speakers perform countermeasure 2), speaker and door trim.
4)
Verify that the chatter and/or vibration is eliminated.
Countermeasure 2
1)
Remove the door trim, speaker and sealing cover.
2)
Install a new sealing cover using 3MTM Windo-Weld(TM) Round Ribbon Sealer 08625 (See figure 3, below). Make sure to use a uniform bead
and press firmly to insure the sealing cover stays in place. Note: Breaks in the bead will allow water leakage and contamination.
^
Reinstall the speaker and door trim.
^
Verify that the chatter and/or vibration is eliminated.
WARRANTY/CLAIM INFORMATION
