Impreza Outback Sport AWD F4-2.5L SOHC (2002)
Front Door Panel: Adjustments
FRONT DOOR PANEL
ADJUSTMENT
1. Using special tool, loosen the body-side bolts of upper and lower hinges to align the position of front door panel longitudinally and vertically.
ST 925610000 DOOR HINGE WRENCH
2. Loosen the screw (A) and tap striker (B) using plastic hammer to adjust striker to align the position of front door panel vertically and laterally at
the rear end.
CAUTION: Do not use impact wrench. Welding area on striker nut plate is easily broken.