Impreza Outback Sport AWD F4-2.5L SOHC (2002)
Rear Door Panel: Adjustments
REAR DOOR PANEL
ADJUSTMENT
1. Open the front door, loosen the door-side bolts of upper and lower hinges to align the position of rear door panel longitudinally and vertically.
2. Loosen the screw (A) and tap striker (B) using plastic hammer to adjust striker to align the position of front door panel vertically and laterally at
the rear end.
CAUTION: Do not use an impact wrench. The welding area on the striker nut plate is easily broken.