Impreza Outback Sport AWD F4-2.5L SOHC (2002)
6) Position the boot in grooves on cylinder and piston.
7) Apply a coat of specified grease to the lock pin and guide pin outer surface, cylinder inner surface, and boot grooves.
Grease: NIGLUBE RX-2 (Part No. 003606000)
8) Install the lock and guide pin boot on support.
2. TURBO MODEL
1) Clean the caliper body interior using brake fluid.
2) Apply a coat of brake fluid to the piston seal and fit piston seal in groove on caliper body.
3) Apply a coat of brake fluid to the entire inner surface of cylinder and outer surface of piston.
4) Insert the piston into cylinder.
CAUTION: Do not force the piston into cylinder.
5) Apply a coat of specified grease to the boot and fit in the groove on ends of cylinder and piston.
Grease: NIGLUBE RX-2 (Part No. 003606000)