Impreza Outback Sport AWD F4-2.5L SOHC (2002)
Radiator Cooling Fan Motor: Service and Repair
Radiator Sub Fan and Fan Motor
REMOVAL
1. Disconnect the battery ground cable.
2. Lift-up the vehicle.
3. Remove the under cover.
4. Remove the radiator under cover.
5. Disconnect the connector of sub fan motor.
6. Lower the vehicle.
7. Remove the air intake duct. (Turbo model)
8. Remove the bolts which hold sub fan shroud to the radiator.
9. Remove the overflow pipe. (Turbo model)
10. Remove the radiator sub fan shroud through the under side of vehicle.
INSTALLATION
Install in the reverse order of removal.