subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Mechanical Specifications|Page 1759 > < Mechanical Specifications|Page 1757
Page 1
background image

Thermostat: Service and Repair

REMOVAL 

1. Lift-up the vehicle.
2. Remove the under cover.

3. Drain engine coolant completely.

4. Disconnect the radiator outlet hose from the thermostat cover.

^

Non-Turbo model

5. Disconnect the radiator outlet hose.

^

Turbo model

6. Remove the thermostat cover and gasket, and pull out the thermostat.

INSTALLATION 

1. Install the thermostat in the water pump, and install the thermostat cover together with a gasket.

CAUTION: 
^

When reinstalling the thermostat, use a new gasket.

Mechanical Specifications|Page 1759 > < Mechanical Specifications|Page 1757