subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Camshaft, Engine|Specifications|Page 1139 > < Camshaft, Engine|Specifications|Page 1137
Page 2
background image

b. Equally loosen the bolts (c) through (j) all the way in alphabetical sequence.

c. Remove the bolts (k) through (p) in alphabetical sequence using ST.

ST 499497000 TORX PLUS

d. Remove the camshaft cap.

14. Remove the camshaft.
15. Remove the oil seal.
16. Remove the plug from rear side of camshaft.

CAUTION: 
^

Do not remove the oil seal unless necessary.

^

Do not scratch the journal surface when removing the oil seal.

INSTALLATION 

1. Apply a coat of engine oil to camshaft journals and install the camshaft.
2. Install the camshaft cap.

a. Apply liquid gasket on the periphery of camshaft cap.

Liquid gasket:

THREE BOND 1280B

Camshaft, Engine|Specifications|Page 1139 > < Camshaft, Engine|Specifications|Page 1137