subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Water Pump|Page 1534 > < Water Pump|Page 1532
Page 4
background image

8. Remove the bolt which installs water by-pass pipe of oil cooler onto oil pump.

9. Disconnect the radiator outlet hose (A) and heater hose (B) from the water pump.

10. Disconnect the water by-pass hose (C) and oil cooler hose (D).
11. Lower the vehicle.
12. Disconnect the overflow hose.

13. Remove the reservoir tank.
14. Remove the radiator main fan and sub fan assemblies.
15. Remove the V-belts.
16. Remove the timing belt.

17. Remove the automatic belt tension adjuster (A).
18. Remove the belt idler (B).
19. Remove the belt idler No. 2 (C).
20. Remove the camshaft position sensor.

Water Pump|Page 1534 > < Water Pump|Page 1532