subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Condenser HVAC|Description and Operation|Page 5048 > < Condenser HVAC|Description and Operation|Page 5046
Page 1
background image

Condenser HVAC: Service and Repair

REMOVAL

1. Using the refrigerant recovery system, discharge refrigerant.
2. Disconnect the ground terminal from battery.

3. Disconnect the pressure hose and pipe from condenser.

4. Remove the radiator bracket (A).

5. Remove two bolts. While lifting condenser, pull it out through space between the radiator and the radiator panel.

CAUTION:  Be careful not to damage the condenser fins. If B damaged fin is found, repair it using a thin screwdriver.

If the condenser is replaced, add appropriate amount of compressor oil to the compressor.

INSTALLATION

1. Install in the reverse order of removal.

Condenser HVAC|Description and Operation|Page 5048 > < Condenser HVAC|Description and Operation|Page 5046