Impreza Outback Sport AWD F4-2.5L SOHC (2002)
Fluid Filter - A/T: Service and Repair
A: REMOVAL
NOTE: The ATF filter is maintenance free.
1. Lift-up the vehicle.
2. Using the ST, remove the ATF filter.
ST 498545400 OIL FILTER WRENCH
3. Get a new ATF filter and apply a thin coat of ATF to the oil seal.
B: INSTALLATION
1. Install the ATF filter. Turn it by hand, being careful not to damage oil seal.
2. Using the ST, tighten the ATF filter to transmission case.
Calculate the ATF filter torque specifications using the following formula.
T2= L1/(L1 + L2) x T1
T1: 14 Nm (1.4 kgf-cm, 10.1 ft. lbs.)
[Required torque setting]
T2: Tightening torque
L1: ST length 0.078 m (3.07 inch)
L2: Torque wrench length
Example:
CAUTION: Align the ST with torque wrench while tightening the ATF filter.
ST 498545400 OIL FILTER WRENCH
3. Add ATF.
4. Inspect the level of ATF.
