subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Fuel Filler Hose|Removal and Installation|Page 2616 > < Fuel Filler Hose|Removal and Installation
Page 2
background image

3. Disconnect the battery ground cable.

4. Remove the screws holding packing in place.
5. Lift-up the vehicle.
6. Remove the rear right side wheel nuts.

7. Remove the rear right side wheel.

8. Drain the fuel from the fuel tank. Set a container under the vehicle and remove the drain plug from the fuel tank.
9. Tighten the fuel drain plug and then install the front right side tank cover.

Tightening Torque: ..................................................................................................................................................  26 Nm (2.65 kgf-m, 19.2 ft. lbs)

Fuel Filler Hose|Removal and Installation|Page 2616 > < Fuel Filler Hose|Removal and Installation