Impreza Outback Sport AWD F4-2.5L SOHC (2002)
Throttle Cable/Linkage: Service and Repair
REMOVAL
1. Remove the accelerator pedal.
2. Separate the accelerator cable and accelerator pedal.
INSTALLATION
1. Install in the reverse order of removal.
CAUTION:
^
If cable clamp is damaged, replace it with a new one.
^
Never fail to cover the outer cable end with boot.
^
Be careful not to kink the accelerator cable.
^
Do not apply grease to the throttle cable on the engine side.
2. Adjust after pedal installation.
