Impreza Outback Sport AWD F4-2.5L SOHC (2002)
INSTRUCTIONS FOR OBTAINING THE CALIBRATION IDENTIFICATION NUMBER (CID) FROM THE ECM
This procedure should only be followed when ECM reprogramming is not possible and you must contact Subaru Tech Line.
STATE EMISSION TESTING ADVISORY
After ECM reprogramming, the OBD system's readiness code monitors will set to "incomplete". Normally, the vehicle needs to be driven under a variety
of conditions before the readiness code monitors will indicate "complete". (See the November 1999 Subaru Technical Support T.I.P.S. and the State I/M
Program Advisory Bulletin, number 11-68-02, dated 3/5/02 for details.)