subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Shift Solenoid, A/T|Specifications|Page 2878 > < Shift Solenoid, A/T|Specifications|Page 2876
Page 1
background image

Shift Solenoid: Service and Repair

A: REMOVAL

1. Set the vehicle on the lift.
2. Disconnect the ground terminal from battery.
3. Lift-up the vehicle.
4. Clean the transmission exterior.

5. Drain the ATF completely.

NOTE:  Tighten the ATF drain plug after draining the ATF.

Tightening torque: 25 Nm (2.5 kgf-cm, 18.1 ft. lbs.)

6. Remove the oil pan. 

7. Disconnect the solenoid and sensor connectors. Remove the connectors from clip and disconnect the connectors.

Shift Solenoid, A/T|Specifications|Page 2878 > < Shift Solenoid, A/T|Specifications|Page 2876