Impreza Outback Sport AWD F4-2.5L SOHC (2002)
13. Finally check clearance between pipes and/or hoses, as shown above.
If the clearance between cruise control pump and power steering hose is less than 10 mm (0.39 in), proceed as follows:
1. Move the clamped section (A) (refer to figure above.) down to a point where the pipe is close to crossmember.
Pipe-to-crossmember clearance: 10 mm (0.39 inch), min.
2. Check that clearance between cruise control pump and power steering hose is at least 10 mm (0.39 inch). If it is not, bend section (B) down
until a clearance of at least 10 mm (0.39 inch) is obtained.
C: INSPECTION
Check all disassembled parts for wear, damage or other abnormalities. Repair or replace faulty parts as required.
