Impreza Outback Sport AWD F4-2.5L SOHC (2002)
^
Do not allow fluid from the hose end to come into contact with pulley belt.
^
To prevent foreign matter from entering the hose and pipe, cover the open ends of them with a clean cloth.
6. Remove the bolts, which install power steering pump bracket.
7. Place the oil pump bracket in a vise, remove the two bolts from the front side of oil pump.
CAUTION: Do not place oil pump bracket directly in the vise; use soft pads and hold oil pump lightly to protect the pump.
8. Remove the bolt from the rear side of oil pump.
9. Disassemble the oil pump and bracket by inserting a screwdriver as shown in the figure.
B: INSTALLATION
1. NON-TURBO MODEL
1. Install the oil pump to the bracket.
