Impreza Outback Sport AWD F4-2.5L SOHC (2002)
9. Slightly loosen the outlet connector, and remove the connector.
2. TURBO MODEL
1. Using ST, place the oil pump in a vise and remove the four bolts, which secure rear cover.
ST 341 99AE020 MOUNT
2. Using a screwdriver, pry the retaining ring off.
CAUTION: Do not remove cam ring, rotor, etc.
3. Extract the oil pump pulley from the front casing.
4. Remove the following parts from the front casing.
5. Place the oil pump in a vise.
CAUTION: Do not place oil pump directly in the vise, use soft pads and hold oil pump lightly to protect the pump.
