Impreza Outback Sport AWD F4-2.5L SOHC (2002)
CAUTION: Secure the gearbox in a vice using the ST as shown. Do not attempt to secure it without this ST.
3. Remove the tie-rod end plate.
4. Remove the tie-rod end and lock nut from the gearbox.
5. Remove the small clip from the boot using pliers and move the boot to the tie-rod end side.
6. Using standard screwdriver, remove the band from the boot.
7. Extend the rack approximately 40 mm (1.57 inch) out. Unlock the lock wire at lock washer on each side of tie-rod end using a standard
screwdriver.
CAUTION: Be careful not to scratch rack surface as oil leaks may result.
