Impreza Outback Sport AWD F4-2.5L SOHC (2002)
4. Tighten the adjusting screw until it no longer tightens.
5. Loosen the adjusting screw and remove the spring and sleeve.
CAUTION: Replace the spring and/or sleeve if damaged.
6. Remove the two bolts securing valve assembly.
7. Carefully draw out the input shaft and remove the valve assembly.
8. Slide the dust cover out.
9. Using a press remove pinion and valve assembly from the valve housing.
10. Using ST and press, remove the dust seal, oil seal and special bearing from the valve housing.