Impreza Outback Sport AWD F4-2.5L SOHC (2002)
Shift Solenoid: Service and Repair
A: REMOVAL
1. Set the vehicle on the lift.
2. Disconnect the ground terminal from battery.
3. Lift-up the vehicle.
4. Clean the transmission exterior.
5. Drain the ATF completely.
NOTE: Tighten the ATF drain plug after draining the ATF.
Tightening torque: 25 Nm (2.5 kgf-cm, 18.1 ft. lbs.)
6. Remove the oil pan.
7. Disconnect the solenoid and sensor connectors. Remove the connectors from clip and disconnect the connectors.