subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Clutch Pedal Assembly|Service and Repair > < M/T - Clutch Pedal Squeaking Noise|Page 3629
Page 2
background image

6. Push the release lever until operating cylinder push rod retracts. Ensure that the clutch fluid level in reservoir tank increases. If the clutch fluid

level increases, hydraulic clutch is properly adjusted; if fluid level does not increase or push rod does not retract, replace the master cylinder with a
new one.

7. Push the release lever until operating cylinder push rod retracts. Check that the clutch fluid level in reservoir tank increases.
8. If the clutch fluid level increases, hydraulic clutch play is correct.
9. If the clutch fluid level does not increase or push rod does not retract, clutch pedal must be readjusted.

10. Check the fluid level on the outside of the reservoir tank. If the level is below "MIN", add clutch fluid to bring it up to "MAX".

Recommended clutch fluid: FMVSS No. 116, fresh DOT 3 or DOT 4 brake fluid

Clutch Pedal Assembly|Service and Repair > < M/T - Clutch Pedal Squeaking Noise|Page 3629