Impreza Outback Sport AWD F4-2.5L SOHC (2002)
Shifter M/T: Service and Repair
Removal and Installation
A: REMOVAL
1. Set the vehicle on the lift.
2. Remove the gear shift knob.
3. Disconnect the ground terminal from battery.
4. Remove the console box.
5. Remove the boot plate from body.
6. Lift-up the vehicle.
7. Remove the rear exhaust pipe and muffler.
8. Remove the heat shield cover. (If equipped)
9. Remove the stay from transmission bracket.
10. Remove the rod from joint.
