Impreza RS Coupe AWD F4-2.5L SOHC (1999)
Cruise Control Switch: Description and Operation
MAIN SWITCH
-
The main switch is the main power supply switch of the cruise control module and has a built-in power indicator and night illumination light.
-
When the ignition switch is placed in the OFF position with the main switch at ON, the main switch is also simultaneously forced to OFF. In this
condition, even if the ignition switch is placed in the ON position again, the main switch will stay in the OFF state.
COMMAND SWITCH
-
When the vehicle is in the cruise control mode, the command switch controls its operation. If inputs SET/COAST signal, ACCEL/RESUME signal
or CANCEL signal to the cruise control module.
-
The command switch is located on the right side of the steering wheel and can be operated without releasing your hand from the steering wheel.
-
The command switch is an auto return lever type.
1. RESUME/ACCEL AND SET/COAST SWITCH
The switch is caused to be ON as long as the lever is kept pressed in any of the positions, and outputs it as a signal to the control module.
2. CANCEL SWITCH
The switch is caused to be ON as long as the lever is pulled toward CANCEL (toward you), and outputs RESUME/ACCEL and SET/COAST
ON signals simultaneously.
CANCEL SIGNALS
The cancel signal cancels the cruise mode. When any of the following switches is operated, the cruise control module cancels the cruise mode.
-
Stop light switch
-
Brake switch
-
Clutch switch (MT model)
-
Inhibitor switch (AT model)
-
Main switch
