Impreza RS Coupe AWD F4-2.5L SOHC (1999)
7. Further tighten all bolts by 80 to 90° in alphabetical sequence.
CAUTION: Ensure that the total "re-tightening angle" [in the former two steps], do not exceed 180°.
3. Install oil level gauge guide and tighten attaching bolt (left side only).
4. Install timing belt, camshaft sprocket and related parts.
2. RELATED PARTS
CAUTION: Be careful not to scratch the mating surface of cylinder block and oil pump.
1. Install engine coolant pipe.
2. Install intake manifold.
3. Connect blow-by hose.
4. Connect oil pressure switch connector.
5. Install camshaft position sensor and camshaft position sensor support.
6. Install connector bracket attaching bolt.
7. Connect spark plug cords.
8. Install generator and bracket.
9. Install A/C compressor and bracket. (With A/C model)
10. Install V-belt(s).
11. Remove ENGINE STAND (ST).
