Impreza RS Coupe AWD F4-2.5L SOHC (1999)
2. Turn camber adjusting bolt so that camber is set at the specification.
NOTE: Moving the adjusting bolt by one scale graduation changes camber by approximately 0°10'.
3. Tighten the two self-locking nuts.
Tightening torque: 152 ± 20 Nm (15.5 ± 2.0 kg-m, 112 ± 14 ft. lbs.)
Caster (Front)
^
Inspection
1. Place front wheel on turning radius gauge. Make sure ground contacting surfaces of front and rear wheels are set at the same height.
2. Set ST into the center of the wheel, and then install the wheel alignment gauge.
ST 927380000 ADAPTER
